Calculate Üç fazlı motor akımı and electrical gücü calculator using engineering units and the defined formula.
Three-Phase Motor Current and Electrical Power Calculator
Calculate three-phase motor current and electrical power calculator using engineering units and the defined formula.
Result chart
Formula and calculation steps
Note: Results are for preliminary engineering evaluation. Verify assumptions, material data, safety factors, applicable standards, and manufacturer limits before final design. Tool version 2.7.1
How to use this calculator
- Enter the measurements and operating values.
- Select the correct engineering unit for each value.
- Press Calculate to view the result and intermediate values.
- Review the equation steps and download a PDF report if needed.
Equation used
I = Pçıkış / (√3 V cosφ η)
How to evaluate the result
Results are for preliminary engineering evaluation. Verify assumptions, material data, safety factors, applicable standards, and manufacturer limits before final design.
Input guide for Three-Phase Motor Current and Electrical Power Calculator
Calculate three-phase motor current and electrical power calculator using engineering units and the defined formula. The table below summarises the inputs and example starting values.
| Parameter | Example value | Units and description |
|---|---|---|
| Motor çıkış gücü | 15 | kW — Enter the value required by the equation. |
| Hat gerilimi | 400 | V — Enter the value required by the equation. |
| Power faktörü cosφ | 0.85 | Dimensionless or selection value |
| Motor andrimi | 90 | % |
Example calculation scenario
For an initial check, enter the example values from the table, select the required units, and choose Calculate. Review the main result and equation, then replace the examples with measured or design data from your system.
Common mistakes when using Three-Phase Motor Current and Electrical Power Calculator
- Ignoring transmission efficiency, service factor, or transient operating conditions.
- Mixing unit systems without checking the selected units.
- Using example values instead of measured or design data from the actual system.
- Accepting the result without checking safety factors, duty cycle, and manufacturer limits.
Fundamental equation: I = Pçıkış / (√3 V cosφ η)
Frequently asked questions
What is Three-Phase Motor Current and Electrical Power Calculator used for?
Calculate three-phase motor current and electrical power calculator using engineering units and the defined formula. Use it for preliminary engineering sizing and independent result checks.
Which equation does this calculator use?
The calculation is based on I = Pçıkış / (√3 V cosφ η). Inputs are converted according to the selected units.
Can the result be used as a final design value?
Results are for preliminary engineering evaluation. Verify assumptions, material data, safety factors, applicable standards, and manufacturer limits before final design. Confirm the result against the current standard, project specification, and manufacturer data.
